The CPM-700 is a broadband receiver that can detect and locate major types of electronic surveillance devices including room, telephone, body bugs, video transmitters, and some analog tape recorders.
The CPM-700 advanced Counter Surveillance Device is a broadband receiver designed to detect and locate all major types of electronic surveillance devices including room, phone, body bugs, video transmitters, and analog tape recorders.
Broadband RF receivers such as the CPM-700 provide a very important cost-effective tool for professional sweep teams, government security personnel, and private citizens with important security needs.
The CPM-700 is very effective for rapidly detecting and locating transmitted signals, while being very easy to learn to use.
The CPM-700 countermeasure sweep kit includes a custom Cordura case that contains all items necessary to conduct a professional sweep.
There are several "imitations" of the CPM-700 on the market because of it's success as a product. While some of these copies may be cheaper, they do not provide the frequency performance and sensitivity of the CPM-700. We guarantee it!
What is the Advantage of the CPM-700
Portable Sweep Kit - provides everything needed to perform a professional sweep; fits inside a standard briefcase.
Multi-Functional Utility - Comes with probes to detect RF transmitters (audio and video), carrier current transmitters, and telephone bugs. Probes also available to detect for infrared transmitters, tape recorders, and acoustic leakage.
Wideband Coverage - from 200Hz to over 3GHz with no holes or gaps.
Monitor Mode - after a sweep, the alarm monitor (silent or audible alert) guards against new devices brought in or remote control activation of surveillance devices.
Auxiliary Audio Input - allows user to listen to telephones or lines for "hotmikes," hookswitch by-pass and "infinity" bugs. Unknown wires and cables can be tested for wired microphones.
Gain: 20dB nominal Frequency
Response: 50kHz-2GHz ±3dB 3GHz-10dB
Sensitivity: -62dBm (1 segment) -85dBm M.D.L.
Frequency Response: 15kHz-1MHz-3dB
MAX input voltage: 300 VAC 50-60Hz
Isolation: 1500 VAC 60Hz
Sensitivity: -38dBm (1 segment) -60 M.D.L.
Input Impedance: 50K Ohm balanced
Input Range: 1.7uV-10V (135dB) AGC
Dynamic Range: 100dB (high and low gain)
Frequency Response:100Hz- 15kHz±3dB (filtered) 500Hz-24dB/octave, 2.5kHz-18dB/octave
Headphone Output: 5Vp-p 220
Record Out: 25 mVp-p nominal with AGC
LCD bargraph: 18 segment with pulsing single segment trip point
50dB dynamic range (1 segment High Gain to MAX Low Gain)
Alert Output: 2.8kHz tone or silent red LED at 2Hz
Remote Output: N.O. contact (300mA 25V MAX)
8 ea. MN1500 AA Alkaline - Life 10-16 hrs
(Optional) 8 ea. 550mAh NiCad - life 3-5 hrs per charge
Low Battery Indicator: approx. 10% remaining power
Input: 95-l30VAC 50-60Hz, or 200-275VAC 50-60Hz
Output: 12VDC with 500mA NiCad Recharge Time: 8-10 hrs
Size: 9 1/8 x 6 1/8 x 1 3/4 in, 23.2 x 15.6 x 4.4 cm
Weight: 39 oz, 1.1 kg
CPM-700 ADVANCED PACKAGE
The CPM-700 ADVANCED package is designed for users who
have a need for additional TSCM testing (IR, Acoustic Leakage,
Network and Telephone wiring testing, etc.). This package also
provides several convenience accessories and includes the
• CPM-700 Countersurveillance Probe/Monitor
• Standard RF Probe (50kHz-3GHz)
• Acoustic Leakage Probe
• Infrared Probe
• VLF Carrier Current Probe
• TVLF Patch Cable
• Magnetic Leakage Probe
• Auxiliary Patch Cable
• Modular Phone Adapter for network and phone line testing
• Tape Recorder Patch Cords
• Cigarette Lighter Adapter for powering the CPM from a
12VDC automobile socket
• Rechargeable Batteries
• Soft carrying case
This package includes several accessories for RF analysis up to 3GHz, Infrared analysis, acoustic leakage testing, network and telephone testing adaptors, and other accessories.
ADVANCED KIT INCLUDES
CPM 700 Probe and Monitor Advanced Kit Includes all standard accessories plus the Infrared Probe, Acoustic Leakage Probe, Magnetic Leakage Probe, Cigarette Lighter Adapter and
Modular Phone Adapter.